Jul 1 11

Ajax CNC Centroid Bridgeport Kits

ajaxcnc

Bridgeport Boss Series I or II, V2XT, V2ES, and Heidenhain TNC 145 Interact I and II CNC Retrofit Kits

This CNC retrofit is designed specifically for Bridgeport Boss Series I or II, V2XT, V2ES, and Heidenhain TNC 145 Interact I and II knee mills. We have more experience retrofitting Bridgeports than any other control manufacturer.Most of the stock components can be re-used, saving you both time and money. See our Introduction to Bridgeport Boss CNC Retrofits for an intro to retrofitting a Boss. Both Bridgeport kits include our Boss Speed Control option, which allows you to retain the stock spindle speed and brake control. A special PLC program is also included so no programming is required on your part at all. A Bridgeport specific wiring schematic is also included to greatly simplify the installation. All Kits come with 2 hours of Phone/Remote Techincal Support!

Bridgeport Boss 1-7 Retrofit Kit

Bridgeport Boss 1-7 Knee Mill CNC Kit $7146

For Boss 1-7 equipped mills, our retrofit kit includes 3 brand new servomotors with 2000 line encoders. The end result is smooth, continuous 3-axis motion. And up to 8x the accuracy of your original control. You’ll be able to perform operations that simply weren’t possible with the Boss control!
Bridgeport Boss 1-7 were originally equipped with stepper motors, the Ajax CNC Kit for these models includes three brand new 29 in-lb servo motors (with installed encoder and cables) and necessary power supplies.
Kit includes:
- ALLIN1DC (Motion Control, PLC, DC Drives)
- Machine Control Pendant
- Qty. 3 29 in-lb DC servo motors with cables installed
- Capacitor + Bridge Combo (Transformer no longer required)
- Centroid Mill CNC Software and Boss PLC program
- 2 Hours of TeamViewer /Remote Technical Support

Bridgeport Boss 8-12 Retrofit Kit Bridgeport Boss 8-12 / V2XT / V2ES / Heidenhain TNC 145 Interact I or II Knee Mill CNC Kit $4274
For these controls, you can reuse your existing servomotors and save money. Use the existing encoders (must accept differential Quadrature signals) or simply replace the low-resolution encoders with our 2000 line units and dramatically increase the performance, and accuracy of your machine. See slide show below.
These Bridgeports were originally equipped with servo motors which (if in good shape) can be reused at significant savings.
Kit includes:
- ALLIN1DC (Motion Control, PLC, DC Drives)
- Machine Control Pendant
- Qty. 3 2000 Line Encoders
- Qty. 3 Pre-Wired Encoder Cables
- Capacitor and Bridge combo
- Centroid Mill CNC Software and Boss PLC program
- 2 Hours of TeamViewer /Remote Technical Support

Encoder Shaft Size



All Ajax Bridgeport Kits Include:

· CENTROID Control Software (Runs on Windows 7 PC)
· DSP Motion Control
· 3-axis Digital Servo Drive
· Machine control pendant
· Boss Speed Control
· Built in pre programmed I/O!
· Full Size Wiring Schematic
· Conversational Programming Software
· Pre-programmed PLC Inputs and Outputs
· Installation and Operator’s manuals
· 2 Hours of TeamViewer /Remote Technical Support

Ajax Boss Kits with CNC Console: Boss 1-7 + Console $10,371 (Call or Email to Order)


Ajax Boss 8-12 / V2XT / V2ES / Heidenhain TNC 145 Interact I or II + Console $7134

Encoder Shaft Size


Kits also available for the Bridgeport DX-32, 308, 412, Discovery Call Sales to take about your specific Boss or other Bridgeport CNC and we’ll put together a kit just for your machine!



Ajax retrofit/upgrade slideshow: CNC Bridgeport knee mills, Boss & V2XT


How to reuse existing Bridgeport servo motors by installing a new Ajax encoder, a pictorial guide