Jul 1 11

Ajax CNC Centroid Mill Kits

ajaxcnc

Mill CNC Retrofit Kits

This professional level retrofit kit includes the electronics and software you need to complete a CNC control installation. Typical applications are desktop mills, knee mills, bed mills and a wide range of sizes and types router tables including plasma and laser cutting tables.This Mill kit can be run as a true 2, 3, 4, 5 or 6 axis CNC control and also in manual mode where the control acts as a DRO. You can even use this Mill kit with your original servomotors and power supplies. If you don’t have servomotors, no problem! AjaxCNC stocks a wide range of CNC Components to complete any retrofit. All Kits come with 2 Hours of TeamViewer /Remote Technical Support!

Mill Retrofit Kit with Servos

Mill Retrofit Kit using Ajax Servo Motors

If your machine is equipped with stepper motors, or the DC servos are not in usable condition, this retrofit package is for you. You will still retain the common components like contactors and fuses, but the entire power supply and motors will be replaced with brand new components. Each servomotor includes a 2000 line encoder preinstalled to dramatically increase the speed, accuracy, and overall performance of your machine.
Kit Includes:-All in One DC CNC Control
– Mill Machine Control Pendant
– Qty. 3 DC Servo Motors (pick the size you need, 17,29 or 40 in-lb) with cables installed
– 110VAC DC Servo Motor Power Supply Kit
(Transformer not needed for 29in-lb Motors)
(220VAC DC Servo Motor Power Supply Kit included with 40 in-lb Motors)
– Centroid Mill CNC Software with Mill PLC Program
– 2 Hours of TeamViewer /Remote Technical Support

Total Price with Servo Motor Option





Mill Retrofit no servos Mill Retrofit Kit for Use with existing DC Servo Motors $4424
This retrofit package is ideal for a knee or bed mill already equipped with quality, DC servomotors. It allows you to reuse the standard components like contactors and fuses, but will save you hundreds of dollars by reusing the motors already on the machine. You also save money by reusing the motor transformer, which is already perfectly matched to your motors. The new 2000 line encoders will dramatically improve the speed, accuracy, and overall performance of your mill.
Kit Includes:- All in One DC CNC Control
– Mill Machine Control Pendant
– Qty. (3) 2000 Line Encoders
– Qty. (3) Pre-Wired Encoder Cables
– Capacitor and Bridge combo
– Centroid Mill CNC Software with Mill PLC Program
– 2 Hours of TeamViewer /Remote Technical Support

Encoder Shaft Size



All Ajax Mill Kits (all in one DC CNC board) Include:

  • Drive, PLC, DSP motion control, spindle control all on one CNC Mill control board.
  • Connects to your computer via Ethernet cable.
  • CENTROID CNC Control Software (runs on Win7/Win8)
  • DSP Motion Control
  • 3-Axis Digital Servo Drive, drives up to 40in-lb/4.52Nm DC servos @180V!
  • Typical Machine Pre-Programmed PLC Inputs and Outputs
  • Conversational Programming Software
  • Installation and Operator’s manuals PDF on CD/DVD
  • Full Size Paper Wiring Schematic
Mill Retrofit Kit DC Barebones $2399
The minimum components to get your Mill retrofitted. If your Mill already has working DC Servo Motors (40in-lb or less) with encoders capable of accepting differntial Quadrature signals. We provide the All in One DC control board, you provide the rest.
Kit Includes:- All in One DC CNC Control
– Centroid Mill CNC Software with Mill PLC Program
– 2 Hours of TeamViewer /Remote Technical Support




Retrofit Kit for 3rd Party Drives

Mill Kits for 3rd Party Drives $3270
If your Mill already has working Servo Motors and Drives this is the retrofit kit for you. Your drives must be able to accept a -10 to +10 volt signal in order to interface with our board.
Kit Includes:- MPU11/GPIO4D
– Mill Machine Control Pendant
– Centroid Mill CNC Software with Mill PLC Program
– 2 Hours of TeamViewer /Remote Technical Support




All Ajax Mill Kits for 3rd Party Drives (MPU11/GPIO4D) Include:

  • CENTROID Control Mill Software(runs on win7 pc!), Including Intercon Mill Programming Software
  • Motion Control Card
  • 4-Axis Digital Servo Drive
  • Pre-Programmed common lathe PLC Inputs and Outputs, limits, home, lube, coolant etc.
  • Spindle “S” Function to run your inverter for the spindle, fully programmable speed, with override
  • Constant Surface Speed turning
  • Installation and Operator’s Manuals
  • Full Size Paper Wiring Schematic
Mill Retrofit Kit for 3rd Party Drives Barebones $2495
Same as the above kit but without a Mill Control Pendant. Use keyboard jogging instead.
Kit Includes:- MPU11/GPIO4D
– Centroid Mill CNC Software with Mill PLC Program
– 2 Hours of TeamViewer /Remote Technical Support

Mill Retrofit Kit ALLIN1DC Mill Retrofit Kit For 3rd Party Drives
Ajax Price Sheet Ajax Price Sheet
click for printable pdf… click for printable pdf…