The ALLIN1DC is a three axis DC brush motor drive with an integrated PLC and motion control processing. Ajax’s DC3IOB and MPU11 technology have been integrated into one unit to provide a highly functional, yet compact motion control product. Communication with a host PC is performed over Ethernet.

• Drive, PLC, DSP montion control, spindle control all on one CNC Mill control board.
• Connects to your computer via ethernet cable.
• CENTROID CNC Control Software (runs on Win7)
• DSP Motion Control
• 3-Axis Digital Servo Drive, drives up to 40 in -lb DC servos!
• Typical Machine Pre-Programmed PLC Inputs and Outputs
• Conversational Programming Software
• Installation and Operator’s manuals PDF on CD/DVD
• Full Size Wiring Schematic

ALLIN1DC Board $2149

---

• 3-Axis 15amp closed loop DC servo drives
• PLC 30 In / 31 Out onboard (expandable to 240 I/O)
• Pre-programmed I/O for:
  - Programmable Spindle Speed
  - Programmable Coolant
• Limit switches can be wired directly with no further software configuration needed
• Auto homing to limit switches or encoder index pulse
• Auto lube control

• Fast Ethernet based communication with any capable PC
  running Mach 3 CNC software
• DSP-based motion control
• 6 encoder inputs onboard
• MPG, probe, and jog panel/pendant connections
• Fiber optic connection
• Multi-axis homing and jogging
• Includes power supply

• Enables communication with up to four 3rd party servo drives
• 16 bit analog to servo drives -10v to +10v
• 12 bit analog to spindle inverter 0 to 10v
• 16 general purpose I/O onboard (expandable to 240 I/O)

he OPTIC4 allows MPU11 based control systems to interface to third party servo drives that accept -10
to +10 VDC current or velocity requests.

• Application: Third Party Drive Interface
• Number of Axes: 4
• Maximum number of Axes: 8 with two OPTIC4 cards in series
• DAC resolution: 16 bits
• Analog Output Voltage: -10 to +10 Volts
• Control Interface: 2 fiber optics to MPU11
  motion control card
• Dimensions (W*D*H): 12 * 5 * 0.75 inches

Optic4 Board $895

---

The PLCADD1616 is a PLC expansion board used to add digital inputs and outputs to a compatible host
PLC.

• Application: PLC Expansion Board
• Digital Inputs: 16
• Digital Outputs: 16
• Control Interface: Shielded, twisted pair cable to host PLC
• Update Rate: 4000 Hz
• Dimensions (W*D*H): 9.8 * 3 * 0.75 inches

PLC Add 1616 Board $395

The ADD4AD4DA is a PLC expansion board used to add analog inputs and outputs to a compatible
host PLC.

• Application: PLC Expansion Board
• Analog Inputs: 4
• Input Resolution: 12 bits
• Analog Outputs: 4
• Output Resolution: 16 bits
• Control Interface: Shielded, twisted pair cable to host PLC
• Update Rate: 2000 Hz
• Dimensions (W*D*H): 9.8 * 3 * 0.6 inches

ADD4AD4AD Board $685